131mm - 140mm

German Böker Eight-Eight (8-8) Flak Damascus Collector's Dagger

- Made in Solingen / Germany -

Introduction:

Boker presents its first military-historical artillery project with the Eight-Eight (8-8) Flak Damascus collector's dagger. The 8.8 cm Flak (short for anti-aircraft gun) is considered by many connoisseurs to be the best and undisputedly most versatile gun of the Second World War. Originally developed for anti-aircraft defence, the Eight-Eight (8-8) established its legendary reputation above all in ground combat.

While anti-tank guns with 3.7 cm to a maximum of 7.5 cm were notoriously under-calibrated for the contemporary armour, anti-aircraft guns regularly had relatively large barrel diameters. It quickly became apparent that only the eight-eight was capable of reliably penetrating the armour of the heavy British Matilda II tank or the Soviet T-34, for example, and above all at greater distances of up to 2,000 metres. The pre-requisite for this was that the barrel of the 8.8 cm anti-aircraft gun could be swivelled to a negative angle of inclination - absolutely untypical for an anti-aircraft gun. This made it possible to lower the barrel below the horizontal plane in order to engage ground targets. The gun could also be swivelled 360° around its vertical axis on a column mount with four cross-shaped outriggers. Another advantage of the eight-eight (8-8) was its speed. On the one hand, this resulted from the short time in which the cross mount could be mounted and dismounted, and the gun could therefore be moved. Another was the high rate of fire. As a semi-automatic cannon with a decelerated barrel recoil, the breech was opened after each shot, the percussion piece cocked, and the empty cartridge ejected. A well-trained operating crew, usually consisting of 9 soldiers, could fire up to 20 rounds per minute. As a result, the German anti-aircraft soldiers were able to shoot down 9 out of 1,000 incoming aircraft.

This figure seems soberingly small, but it is still considered to be the highest firing rate of an anti-aircraft gun in the history of war. The 8.8 cm anti-aircraft gun also played a significant role in the legendary reputation of another weapon of the Second World War, which Boker has already used in a Damascus collector's knife. As the main armament, it was installed in the turret of the VI tank, better known as the Tiger. Proven through this use, it later also became the gun of the Nashorn (Rhino) tank destroyer.

The Eight-Eight (8-8) Flak Damascus project has been realised as a fulyl-fledged dagger with a medieval look. The centrepiece is the slender but massive 18.1 cm long blade forged from parts of the 8.8 cm Flak. The handle scroll is turned from a piece of domestically stabilised hornbeam with 16 jimpings. On closer inspection, the radii and proportions of the 5 mm thick stainless steel parrying piece discreetly form the outline of the cross-guard with side extensions folded up for transport. The silhouette of the folded-out mount is indicated on the base of the solid stainless steel end knob. The dagger is fitted with a dark brown leather sheath with a belt loop and localised reinforcement. Supplied with an elegant storage box, certificate of authenticity and a individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 7.204“ inch / 183 mm 
Total length: 12.598” inch / 320 mm
Handle length: 5.393" inch / 137 mm
Handle scales: Iron Wood

Blade Thickness: 6.1 mm
Overall weight 292 gr.

Boker Kalashnikov Bayonet Damascus Folding Knife

- Made in Solingen / Germany -

Introduction:

In 1947, Mikhail Kalashnikov presented the AK-47 assault rifle he had designed to the Red Army and immediately convinced the decision-making bodies of its development. Only two years later, the now world-famous AK-47 was officially put into service as the "7.62 mm Awtomat Kalasshnikova obraztsa 1947". Even then, the simple and reliable design as a gas pressure loader with a rotary head breech, the consistent use of sheet metal stampings that could be produced quickly and inexpensively, and the adherence to a cartridge class introduced by the Wehrmacht with the StG 44 with an average performance between submachine gun and rifle ammunition were trend-setting to this day. These features resulted in the Kalashnikov system being the most widely built and replicated handgun in history, with an estimated 100 million made worldwide today.

Introduced in 1959 along with the AKM, the revised variant of the AK-47, the bayonet was no less revolutionary and formative for later designs than the famous assault rifle itself. The concept was based on a knife originally developed by R. Todorov for combat swimmers. It marked a move away from long bayonets, which were used purely as stabbing weapons, to a short, mountable utility knife with insulated wire shears and a multifunctional back saw.

Mikhail Kalashnikov personally visited the Boker Manufactory in Solingen in 2002 and officially introduced the Boker Kalashnikov line of knives to the public. More than 70 years after the AK-47 entered service, we now present a truly exceptional special edition model of the knife line and once again honour his brilliant engineering achievement. The Boker Kalashnikov Bayonet Damscus is equipped with a unique Damascus blade made from the steel of the 6Ch3 and 6Ch4 bayonets according to the GRAU index of the former Soviet Army and decorated with the signature of General Kalashnikov. The stainless Damascus by Chad Nichols consists of 80 layers and is forged by hand in the Virus pattern. It features an unusually intricate pattern that is the result of a very controlled forging process. The blade with the pandur tip adopted from the bayonets is opened with the help of the thumb stud and locked by a sturdy linerlock.

The handle is CNC machined from a block of 6061-T6 Aluminum and then hardcoat anodized black. The stabilized inlays are made of domestic hornbeam wood, reminiscent of the stock wood of the famous assault rifle, and together form the shape of the forend's distinctive vents. The Russian Amber Shellac colour of the original stocks has been precisely matched. They are also CNC milled from the solid and inserted by hand. All screws and the clip (tip-up/r) are also black anodized. Handmade in the Boker Knife Manufactory in Solingen. Delivery with noble floating display, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus stainless steel
Blade length: 3.779“ inch / 96 mm 
Total length: 8.976” inch / 228 mm
Handle length: 5.196” inch / 132 mm
Handle scales: Aluminum / Iron Wood

Blade thickness: 4 mm
Overall weight 158 gr.

German Böker XL 2.0 Full Integral Knife

- Made in Solingen / Germany -

Introduction:

The Boker Vollintegral XL is the big brother of the Boker Vollintegral, which has been tried and tested for many years, and meets the wish often expressed to us for a larger version. The impressive blade of satin- finnished 440C with a flat grind further maximises the stability of the blade. The steel is ice hardened to 58 to 59 HRC, making it suitable for stronger game, whether in northern Europe or overseas. The knife, drop-forged from one piece of steel, with intricately contoured handle scales is made of certified imported rosewood that always lies securely in the hand. The hand guard and knob are rounded to optimise the look and feel in the hand. Supplied with a high-quality brown leather sheath. Handmade in the Boker Knife Manufactory in Solingen.

Specifications:

Steel: 440C stainless steel
Blade length: 5.787“ inch / 147 mm
Total length: 11.259” inch / 286 mm
Handle length: 5.472” inch / 139 mm
Handle scales: Rose Wood

Blade Thickness: 5 mm
Overall weight: 300 gr.

German Böker XL 2.0 Stag Full Tang Knife

- Made in Solingen / Germany -

Introduction:

The big brother of the ageless trusty Full-Tang addresses the frequently expressed desire for a larger version. With a blade length of approx. 14.7 cm, the Full-Tang is also appropriate for bigger game, from Northern Europe to overseas. The Full-Tang XL gets the same model maintenance features as the smaller Full-Tang. The handle was given a more crowned shape, while the parrying element and pommel are rounded to optimize visual appeal and handling. Moreover, the Full-Tang XL now also has the finger grooves of the more compact model to achieve the best possible ergonomics. The blade on the XL was also converted to a flat grind to maximize blade strength. Die-forged from a single 440C blank. Shipped with leather sheath. With scales made from premium stag horn.

Specifications:

Steel: 440C stainless steel
Blade length: 5.787“ inch / 147 mm
Total length: 11.259” inch / 286 mm
Handle length: 5.472” inch / 139 mm
Handle scales: Stag Horn

Blade Thickness: 5 mm
Overall weight: 338 gr.

Cudeman 104-C "Rehalero" Pig Sticker Stag Hunting Knife

- Made by Cudeman in Spain -

Cudeman Pig Sticker Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 9.449” inch / 240 mm
Total length: 14.961” inch / 380 mm
Handle length: 5.512” inch / 140 mm
Handle scales: Stag Horn 
Blade thickness: 5 mm
Knife weight 471 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 135 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Spear-Point

– Grind: Hollow Grind

– Finger Guard: A-304 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Fuller on the Blade

Cudeman 104-L "Rehalero" Pig Sticker Hunting Knife

- Made by Cudeman in Spain -

Cudeman Pocket Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 9.449” inch / 240 mm
Total length: 14.961” inch / 380 mm
Handle length: 5.512” inch / 140 mm
Handle scales: Satin Olive Tree Wood
Blade thickness: 5 mm
Knife weight 471 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 135 gr.

– Fixation of the Handle : Oval-Head Rivets

– Blade shape: Spear-Point

– Grind: Hollow Grind

– Finger Guard: A-304 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Fuller on the Blade

Cudeman 105-C "Facochero" Pig Sticker Hunting Stag Knife

- Made by Cudeman in Spain -

Cudeman Pig Sticker Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 8.858” inch / 225 mm
Total length: 14.370” inch / 365 mm
Handle length: 5.512” inch / 140 mm
Handle scales: Polished Deer
Blade thickness: 5 mm
Knife weight 451 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 138 gr

– Fixation of the Handle : Flat-Head Rivets

– Blade shape: Dagger

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Fuller on the Blade

Cudeman 105-L Pig Sticker Hunting Knife

- Made by Cudeman in Spain -

Cudeman Pig Sticker Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 8.858” inch / 225 mm
Total length: 14.370” inch / 365 mm
Handle length: 5.512” inch / 140 mm
Handle scales: Satin Olive Tree Wood
Blade thickness: 5 mm
Knife weight 451 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 138 gr

– Fixation of the Handle: Flat-Head Rivets

– Blade shape: Dagger

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Fuller on the Blade

Cudeman 105-R "Facochero" Pig Sticker Hunting Knife

- Made by Cudeman in Spain -

Cudeman Pig Sticker Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 8.858” inch / 225 mm
Total length: 14.370” inch / 365 mm
Handle length: 5.512” inch / 140 mm
Handle scales: Polished Red Stamina
Blade thickness: 5 mm
Knife weight 451 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 138 gr

– Fixation of the Handle : Flat-Head Rivets

– Blade shape: Dagger

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Fuller on the Blade

Cudeman 106-C Bowie Hunting Stag Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 9.449” inch / 250 mm
Total length: 14.961” inch /  380  mm
Handle length: 5.512” inch / 140 mm
Handle scales: Polished Deer
Blade thickness: 5 mm
Knife weight 513 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 138 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 106-M Hunting Bowie Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 9.449” inch / 250 mm
Total length: 14.961” inch /  380 mm
Handle length: 5.512” inch / 140 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5 mm
Knife weight 507 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 138 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 106-R Bowie Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Steel 54/56 HRC
Blade length: 9.449” inch / 250 mm
Total length: 14.961” inch /  380 mm
Handle length: 5.512” inch / 140 mm
Handle scales: Polished Red Stamina
Blade thickness: 5 mm
Knife weight 500 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 138 gr

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 117-L "APACHE" Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 7.677” inch / 195 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Satin Olive Wood
Blade thickness: 5 mm
Knife weight 354 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle : Flat Head Rivets

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Cudeman 117-R Apache Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 7.677” inch / 195 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Polished Red Stamina
Blade thickness: 5 mm
Knife weight 354 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle : Flat Head Rivets

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Cudeman 121-L "Pistolo" Bowie Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.299” inch / 160 mm
Total length: 11.614” inch /  295 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Satin Olive Wood
Blade thickness: 5 mm
Knife weight 257 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 95 gr.

– Fixation of the Handle: Flat Head Rivets

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Cudeman 126-M or 126-M-K Spartan Bushcraft Survival Knife

- Made by Cudeman in Spain -

Introduction:

This is a very sturdy Bushcraft Knife for all outdoor activities. The full tang blade is made of high-quality MOVA stainless steel and has a Rockwell hardness of 54° - 56° degrees. There are two editions available: Standard or KYDEX.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.543” inch / 160 mm
Total length: 7.677” inch / 300 mm
Handle length: 4.134” inch / 140 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width: 5 mm
Net weight 384 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather Sheath

– Hole for a Safety Cord

– Sheath Weight : 275 gr.

– Glass-Breaker

KYDEX Edition Sheath Version:

– Hole for a Safety Cord

– Sheath weight : 110 gr.

– Glass-Breaker

Cudeman 250 Hunting Skinner Gut Hook Knife With Olive Wood Handle

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 5.118” inch / 130 mm
Total length: 8.268” inch /  265 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Satin Olive Wood
Blade thickness: 5 mm
Knife weight 237 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 78 gr.

– Fixation of the Handle: Oval-Head Rivets

– Bolster: A-304 Polished Stainless Steel

– Blade Shape: Skinner

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Handmade Decoration on the Handle

Cudeman 252-J Survival SVK II. Outdoor Machete

- Made by Cudeman in Spain -

Cudeman Survival Machete with MOVA blade.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.230” inch / 310 mm
Total length: 11.417” inch / 450 mm
Handle length: 5.118” inch / 140 mm
Handle scales: Orange G10 with Detailed Black Line
Blade thickness: 2.8 mm
Knife weight 412 gr.

Description:

Standard Edition Sheath Version:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

– Blade Finish: Satin Finish

– Hole for a Safety Cord

– Glass-Breaker

– Sheath weight: 241 gr.

Cudeman 252-M Survival SVK II. Outdoor Machete

- Made by Cudeman in Spain -

Cudeman Survival Machete with MOVA blade.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.230” inch / 310 mm
Total length: 11.417” inch / 450 mm
Handle length: 5.118” inch / 140 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 2.8 mm
Knife weight 412 gr.

Description:

Standard Edition Sheath Version:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

– Blade Finish: Satin Finish

– Hole for a Safety Cord

– Glass-Breaker

– Sheath weight: 241 gr.

Cudeman 288-C Classic Hunting Stag Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 5.118” inch / 130 mm
Total length: 8.268” inch /  265 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Polished Deer
Blade thickness: 5 mm
Knife weight 237 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 78 gr.

– Fixation of the Handle: Oval-Head Rivets

– Bolster: A-304 Polished Stainless Steel

– Blade Shape: Skinner

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Handmade Decoration on the Handle

Cudeman 299-B or 299-B-K Boina Verde (BV) Bushcraft Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler N695 blade.

There are two Editions available: Standard Edition or Special Edition. The Special Edition means there belongs a Kydex sheath to the knife.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 7.087” inch / 180 mm
Total length: 12.402” inch / 315 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width: 5.33 mm
Net weight 444 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 265 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Multi Position Sheath

– Bullet Opener

Kydexl Edition:

– KYDEX Sheath

– Hole for a Safety Cord

– Sheath weight: 265 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

Cudeman 299-BC  Boina Verde (BV) Bushcraft Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler N690 stainless steel blade.

Specifications:

Steel: Böhler N690 Steel 59/ 60 HRC
Blade length: 7.087” inch / 180 mm
Total length: 12.402” inch / 315 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width:  5 mm
Knife weight 420 gr. / sheath weight 370 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin finish

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 370 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

- Pin for fastening cord

- Glass breaker

- Wire breaker

- Bullet encapsulator

- Zipper on the edge for better grip

 - Including: Sharpening stone

- Signal mirror

- Sundial

- Flint

- Red paracord (2.80 m)

Cudeman 299-N or 299-N-K Boina Verde (BV) Bushcraft Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with MOVA blade.

There are two Editions available: Standard Edition or Special Edition.

The Special Edition means there belongs a Kydex sheath to the knife.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: Molybdenum Steel 54/56 HRC
Blade length: 7.087” inch / 180 mm
Total length: 12.402” inch / 315 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width:  5.33 mm
Net weight 444 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Black Coated

Standard Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 265 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Multi Position Sheath

– Bullet Opener

Kydex Edition:

– KYDEX Sheath

– Hole for a Safety Cord

– Sheath weight: 265 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

Cudeman 299-NC  Boina Verde (BV) Bushcraft Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler N690 stainless steel blade.

Specifications:

Steel: Böhler N690 Steel 59/ 60 HRC
Blade length: 7.087” inch / 180 mm
Total length: 12.402” inch / 315 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width:  5.33 mm
Net weight 444 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Black Coated

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 265 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Multi Position Sheath

– Bullet Opener

- Pin for fastening cord

- Glass breaker

- Wire breaker

- Bullet encapsulator

- Zipper on the edge for better grip

- Muti position holster

- Complete black leather adapter (642-N)

 including: -Sharpening stone

- Signal mirror

- Sundial

- Flint

- Red paracord (2.80 m)