Special Offers

Fallkniven Kolt KKLz Hunting Knife

- Made by Fällkniven -

Introduction:

The Kolt Knife is probably Fallkniven´s best dry meat knife, no other knife is as good as the KK when it comes to cutting thin slices of a piece of dried or smoked meat. Of course, the knife can be used for a lot more and the simple reason is the handy size. In its original form the Kolt Knife had a very simple blade cover. However, many fans of the KK knife today were interested in a traditionally shaped leather sheath. We are now offering the KK frock knife with well-fitting sheath made of heavy black leather of the best quality. A small zytel edge cover is also included.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.35" inch / 85 mm
Total length: 7.28” inch / 185 mm
Handle length: 3.94 inch / 100 mm
Handle scales: Thermorun

Blade thickness: 3.85 mm
Knife weight 84 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather & Zytel Edge Cover

Tang: Broad Tang

Finger Guard: Stainless Steel

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Njord NL3L Hunting Knife

- Made by Fällkniven -

Introduction:

Njord was the god of fertility in the Norse sagas and belonged to the Vanir clan. He was also the god of sailors and fishermen, and the ruler of coasts and beaches. NL3 Njord is a strong, well-balance knife that is a joy to handle. It is hard to find a more attractive all-round knife and its strength of course lies in the laminated VG7 steel. When it comes to the Northern Light Series nothing has been spared to make the knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.

A 6 mm thick blade in itself would be strong enough for most tasks – with laminate technology one can expect an additional 20% strength in the form of resistance to bending, as compared to an ordinary VG10 blade. The handle consists of specially selected oxhide: sadly a material that is usually overlooked by manufacturers, but which gives a sure and rugged grip. It ages beautifully and as the years pass it acquires an attractive brown patina, and it is unaffected by oil and solvents and impervious to water. Dryness might cause small cracks on the handle but they disappear when the knife is put to use again. We are persisting with the convex edge, since we consider this to be the ultimate combination of cutting performance and edge strength, and of course our NL3 Njord knife features this. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: Laminated VG7 HRC 59
Blade length: 5.91" inch / 150 mm
Total length: 10.55” inch / 268 mm
Handle length: 4.65” inch / 118 mm
Handle scales: Leather

Blade thickness: 6 mm
Knife weight 266 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Protruding Broad Tang

Fallkniven Tungsten Carbine S1L Forest Knife

- Made by Fällkniven -

Introduction:

The Fallkniven S1 Forest Knife is one of the best knife ever made for outdoor adventure and fishing. The sturdy blade of the S1 made of extremely strong laminated VG7 custom stainless steel. The edge of the S1 is a convex grind for extra strong cutting power. The modified clip point blade shape works extremely well for penetrating tough materials, and the long curved edge is ideal for skinning. The blade of the S1 is long enough for mild chopping work. With a full 5mm (0.2″) thickness, there is little chance the blade could ever break. The checkered handle of the S1 provides an excellent grip in all conditions even when your hands are cold and wet. If you are looking for top quality classic knife, the Fallkniven S1 is one of the best in the world. The sheath is our open top dangler black leather sheath.

Specifications:

Steel: Laminated VG7 HRC 59

Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 193 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

Fallkniven S1pro Survival Knife

- Made by Fällkniven -

Introduction:

S1pro – Laminated CoS steel
There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance.

We began developing the Pro Series knives back in 2010 and finally five years later, we could offer three amazing Pro Series survival knives that are the new world standard for survival knife performance and manufacturing.

Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.

Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced.

A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knifes.

Specifications:

Steel: Laminated Cobalt Steel HRC 60
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 257 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tungsten Carbine S1xb  Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface.

Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 290 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Blade: Black Coated

Laminated CoS: A newly developed high alloy cobalt-special steel

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Full Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Taiga Forester TF2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is a special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 4.72" inch / 120 mm
Total length: 9.25” inch / 235 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 120 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Taiga Hunter TH2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand, or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.31" inch / 84 mm
Total length: 7.40” inch / 188 mm
Handle length: 4.09” inch / 104 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 116 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Thor NL1L Hunting Knife

- Made by Fällkniven -

Introduction:

Model NL1 Thor. It’s a strong chopper of world-class quality, where nothing has been spared to make the knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use. The blade is made of laminated VG10 steel, where the edge is made of our now renowned VG10 steel and the sides consist of tough, all-stainless 420J2 steel. This combination is good since it brings together all conceivable and desirable properties such as resilience, resistance to torque and edge-durability in a single blade. A 7 mm (0.28″) thick blade in itself would be strong enough for most tasks – with laminate technology one can expect an additional 20% strength in the form of resistance to bending, as compared to an ordinary VG10 blade.

Everyone who has used a chopper knows that it is designed for heavy use, which makes great demands on the blade and handle. Our handle consists of specially selected oxhide: sadly a material that is usually overlooked by manufacturers, but which gives a sure and rugged grip. It ages beautifully and as the years pass it acquires an attractive brown patina, and it is unaffected by oil and solvents and impervious to water. Dryness might cause small cracks on the handle but they disappear when the knife is put to use again. We are persisting with the convex edge, since we consider this to be the ultimate combination of cutting performance and edge strength, and of course our NL1 Thor knife features this. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Knives in general are of course mass produced, where CNC (Computer Numerically Controlled) robots and grinders shape the blades as best they can. The machines are loaded with stacks of blades so that production can go on 24 hours a day and the result is quite often really good – good knives at affordable quotes. However, if you want top-drawer strength, corrosion-resistance, edge durability and design, the machine hasn’t been made that can come even close to the craftsmanship of a trained, skilled knifesmith. Therefore, we take great pride in being able to present the first model in our Northern Lights Series – the NL1 Thor, well aware of that only the most quality-conscious will appreciate its assets. It felt natural to give this chopper the name of the Aesir’s strongest and most powerful god, the ruler of the Aesir’s domicile, Asgard, the strong, red-bearded god of thunder – Thor. Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 9.84" inch / 250 mm
Total length: 15.16” inch / 385 mm
Handle length: 5.31” inch / 135 mm
Handle scales: Leather

Blade thickness: 7 mm
Knife weight 502 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Protruding Broad Tang

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Tre Kronor de Lux TK5L Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. These knives are in the Swedish minimalist idiom, where form harmonises with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden. The experienced hunter will certainly like this knife! For clearing a game a knife doesn’t have to be very large but well shaped. A droppoint-blade has got the right design for not cutting through membranes and guts, that is if you know how to put the cut. This three-finger knife will work properly if you place the endbutt into your palm and your fingers over the blade. The TK5 is not the regular woodcarving knife but should be considered as a pure hunting knife. Still many people like the slightly shorter size which for sure will make the TK5 a very popular allround knife. The wood handle doesn’t need any special care but a drop of furniture cream now and then won’t hurt.

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: ELMAX HRC 61-62
Blade length: 3.15" inch / 80 mm
Total length: 6.89” inch / 175 mm
Handle length: 3.74” inch / 95 mm
Handle scales: Cocobolo

Blade thickness: 4,5 mm
Knife weight 151 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Nickel silver

Tang: Full Tang

Fallkniven Tre Kronor TK6z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. These knives are in the Swedish minimalist idiom, where form harmonises with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden. If there is a quality that hunters appreciate very much, I would suggest the edge retention! This blade is made of stainless laminate powdersteel which is combining both strength and edge retention. Most truly, you have never before handled a knife which holds up an edge better than this model. When the sharpess finally is gone, you restore the edge by using a fine, flat diamond whetstone. You maintain your good knife by keeping it clean and dry and, should it get dirty, use some warm water and washing-up liquid, wipe off and let dry.

Specifications:

Steel: 3G HRC 62
Blade length: 3.15" inch / 80 mm
Total length: 6.89” inch / 175 mm
Handle length: 3.74” inch / 95 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 119 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Fallkniven WM1L Hunting Knife

- Made by Fällkniven -

Introduction:

More than half the world’s population is female – and yet model WM is probably the first sheath knife designed from scratch to suit the hands and requirements of WoMen. The non-aggressive blade design, the safe well-tailored handle, the robust leather sheath – everything breathes functionality. The improved convex ground blade provides a blade profile which cuts with ease, while giving a sharp edge suitable for whittling. The comfortable, ergonomically designed handle gives a good, secure grip even in wet or cold hands and enables full control of the edge positioning. The knife is equipped with a hygienic zytel sheath or a well sewn leather sheath.

Specifications:

Steel: Laminated VG7 HRC 60
Blade length: 3.03" inch / 77 mm
Total length: 6.89” inch / 175 mm
Handle length: 3.86 inch / 98 mm
Handle scales: Thermorun

Blade thickness: 3.5 mm
Knife weight 77 gr.

Additional Information:

Edge: ICE (Improved Convex Edge)

Sheath Included: Leather

Tang: Broad Tang

FOX FX-ATC-OG02 MCF PACIFICO Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

Bob Terzuola:

"I always design my knives to be functional but graceful. The utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

The Pacific knife represents the culmination of Bob Terzuola and his wife Suz's move to San Diego. Inspired by their days spent immersed in the waters of the Pacific, this knife carries with it the essence of the ocean. Every detail is shaped by their experiences encountering new sea creatures, from whales to dolphins, that have left an indelible imprint. The traditional shape of the Italian Stiletto has been reinterpreted with the addition of a tail, evoking the grace and strength of the sea inhabitants. Holding the Pacific is like grasping a piece of the Pacific Ocean itself. Built with the sturdiness that characterizes Bob Terzuola's other creations, this knife is not only an object of beauty, but also a reliable tool for everyday carry.

Specifications:

Designer: Bob Terzuola

Blade steel: Magnacut

Hardness: HRC 62-64

Blade coating: Satinated

Handle: Dark Matter by Fatcarbon®

Spacer: Black G10

Screws: AISI 303 PVD nero

Clip: Black idroglider AISI 420 

Blade Thickness: 3.5 mm - 0.14"

Blade Length: 95 mm - 3.74"

Overall Length: 230 mm - 9.06"

Sheath: Nylon® + Terzuola patch

Made in: Italy

FOX Bushman FX-609 OD Bushcraft Knife

- Made by Fox Knives in Italy -

- Design by: "FOX Knives" -

Introduction:

The Fox Bushman knife, is an incredibly strong bushcraft knife that is almost unbreakable and can withstand the toughest challenges. The Bushman leather sheath can be used both in vertical and horizontal position thanks to the separable loops.

Specifications:

Steel: D2 stainless steel HRC 59-61
Blade length: 6.30" inch / 160 mm
Total length: 11.42” inch / 290 mm
Handle length: 5.12” inch / 130 mm
Handle scales: Canvas Micarta OD Green

Blade thickness: 5 mm
Overall weight 370 gr.

Additional Information:

Blade Coating: Black Idroglider stone washed

Leather Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Fairbairn Sykes FX-592 & FX-592 W Dagger

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Anodized T6-6082 black anodized or Walnut wood

Blade thickness: 5 mm
Overall weight 205 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Leather Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Fairbairn Sykes FX-592 AF Dagger (double edged)

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

With leather sheath and original box.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Anodized T6-6082 black anodized

Blade thickness: 5 mm
Overall weight 205 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Leather Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Fairbairn Sykes FX-592 WAF Dagger

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

With leather sheath and original box.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Anodized T6-6082 black anodized

Blade thickness: 5 mm
Overall weight 205 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Leather Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX FKMD Sputnik 10 FX-810 B Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 4.72" inch / 120 mm
Total length: 9.65” inch / 245 mm
Handle length: 4.92” inch / 125 mm
Handle scales: TPR black

Blade thickness: 5 mm
Overall weight 215 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX FKMD Sputnik 13 FX-813 BG Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

* Please request availability *

Introduction:

The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.02" inch / 153 mm
Total length: 11.02” inch / 280 mm
Handle length: 5.00” inch / 127 mm
Handle scales: TPR green

Blade thickness: 5 mm
Overall weight 245 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX FX-106 DCF Eastwood Tiger Damascus Knife

- Made by Fox Knives in Italy -

Introduction:

The Eastwood Tiger was born in 2021 with the frame lock line and is now revamped with a fixed blade version. This model was designed by Gudy Von Poppel with the idea of designing a tactical knife that was strong and efficient and managed to evoke classic lines, features and materials. Operation certainly succeeded especially in this new version that provides a firm grip thanks also to the modestly sized guard that blocks the handle during the most difficult jobs. The Eastwood Tiger is a knife suitable for outdoor situations thanks also to its practical leather sheath that allows easy carrying. 

Specifications:

Designer: Gudy Van Poppel

Blade steel: Damaststahl Super Clean® by Balbach Damast®

Blade coating: Etching with hidrochloric acid

Handle: Uni-Copper by Fatcarbon®

Screws: AISI 303 PVD nero

Blade Length: 110 mm - 4.33"

Overall Length: 240 mm - 9.45"

Blade Thickness: 5.0 mm - 0.20"

Sheath: Leather

Made in: Italy

Weight: 265 gr - 9.35 oz

FOX FX-106 MIOD Eastwood Tiger Knife

- Made by Fox Knives in Italy -

Introduction:

The Eastwood Tiger was born in 2021 with the frame lock line and is now revamped with a fixed blade version. This model was designed by Gudy Von Poppel with the idea of designing a tactical knife that was strong and efficient and managed to evoke classic lines, features and materials. Operation certainly succeeded especially in this new version that provides a firm grip thanks also to the modestly sized guard that blocks the handle during the most difficult jobs. The Eastwood Tiger is a knife suitable for outdoor situations thanks also to its practical leather sheath that allows easy carrying.

Specifications:

Designer: Gudy Van Poppel

Blade steel: Niolox 

Hardness: HRC 59-61

Blade coating:  Stone washed 

Handle: OD green canvas Micarta 

Screws: Sandblasted AISI 304

Blade Length: 110 mm - 4.33"

Overall Length: 240 mm - 9.45"

Blade Thickness: 5.0 mm - 0.20"

Sheath: KYDEX

Made in: Italy

Weight: 245 gr - 8.64 oz 

FOX FX-106 TICF Eastwood Tiger Knife

- Made by Fox Knives in Italy -

Introduction:

The Eastwood Tiger was born in 2021 with the frame lock line and is now revamped with a fixed blade version. This model was designed by Gudy Von Poppel with the idea of designing a tactical knife that was strong and efficient and managed to evoke classic lines, features and materials. Operation certainly succeeded especially in this new version that provides a firm grip thanks also to the modestly sized guard that blocks the handle during the most difficult jobs. The Eastwood Tiger is a knife suitable for outdoor situations thanks also to its practical leather sheath that allows easy carrying.

Specifications:

Designer: Gudy Van Poppel

Blade steel: Elmax

Hardness: HRC 59-61

Blade coating: PVD

Handle: Sandblasted titanium + carbon fiber insert

Blade Length: 110 mm - 4.33"

Overall Length: 240 mm - 9.45"

Blade Thickness: 5.0 mm - 0.20"

Sheath: Leather

Made in: Italy

Weight: 300 gr - 10.58 oz

FOX FX-106 TIZW Eastwood Tiger Knife

- Made by Fox Knives in Italy -

Introduction:

The Eastwood Tiger was born in 2021 with the frame lock line and is now revamped with a fixed blade version. This model was designed by Gudy Von Poppel with the idea of designing a tactical knife that was strong and efficient and managed to evoke classic lines, features and materials. Operation certainly succeeded especially in this new version that provides a firm grip thanks also to the modestly sized guard that blocks the handle during the most difficult jobs. The Eastwood Tiger is a knife suitable for outdoor situations thanks also to its practical leather sheath that allows easy carrying.

Specifications:

Designer: Gudy Van Poppel

Blade steel: Elmax

Hardness: HRC 59-61

Blade coating: Satinated

Handle: Bronze anodized titanium + ziricote insert 

Blade Length: 110 mm - 4.33"

Overall Length: 240 mm - 9.45"

Blade Thickness: 5.0 mm - 0.20"

Sheath: Leather

Made in: Italy

Weight: 295 gr - 10.58 oz