Over €500

German Böker Eight-Eight (8-8) Flak Damascus Collector's Dagger

- Made in Solingen / Germany -

Introduction:

Boker presents its first military-historical artillery project with the Eight-Eight (8-8) Flak Damascus collector's dagger. The 8.8 cm Flak (short for anti-aircraft gun) is considered by many connoisseurs to be the best and undisputedly most versatile gun of the Second World War. Originally developed for anti-aircraft defence, the Eight-Eight (8-8) established its legendary reputation above all in ground combat.

While anti-tank guns with 3.7 cm to a maximum of 7.5 cm were notoriously under-calibrated for the contemporary armour, anti-aircraft guns regularly had relatively large barrel diameters. It quickly became apparent that only the eight-eight was capable of reliably penetrating the armour of the heavy British Matilda II tank or the Soviet T-34, for example, and above all at greater distances of up to 2,000 metres. The pre-requisite for this was that the barrel of the 8.8 cm anti-aircraft gun could be swivelled to a negative angle of inclination - absolutely untypical for an anti-aircraft gun. This made it possible to lower the barrel below the horizontal plane in order to engage ground targets. The gun could also be swivelled 360° around its vertical axis on a column mount with four cross-shaped outriggers. Another advantage of the eight-eight (8-8) was its speed. On the one hand, this resulted from the short time in which the cross mount could be mounted and dismounted, and the gun could therefore be moved. Another was the high rate of fire. As a semi-automatic cannon with a decelerated barrel recoil, the breech was opened after each shot, the percussion piece cocked, and the empty cartridge ejected. A well-trained operating crew, usually consisting of 9 soldiers, could fire up to 20 rounds per minute. As a result, the German anti-aircraft soldiers were able to shoot down 9 out of 1,000 incoming aircraft.

This figure seems soberingly small, but it is still considered to be the highest firing rate of an anti-aircraft gun in the history of war. The 8.8 cm anti-aircraft gun also played a significant role in the legendary reputation of another weapon of the Second World War, which Boker has already used in a Damascus collector's knife. As the main armament, it was installed in the turret of the VI tank, better known as the Tiger. Proven through this use, it later also became the gun of the Nashorn (Rhino) tank destroyer.

The Eight-Eight (8-8) Flak Damascus project has been realised as a fulyl-fledged dagger with a medieval look. The centrepiece is the slender but massive 18.1 cm long blade forged from parts of the 8.8 cm Flak. The handle scroll is turned from a piece of domestically stabilised hornbeam with 16 jimpings. On closer inspection, the radii and proportions of the 5 mm thick stainless steel parrying piece discreetly form the outline of the cross-guard with side extensions folded up for transport. The silhouette of the folded-out mount is indicated on the base of the solid stainless steel end knob. The dagger is fitted with a dark brown leather sheath with a belt loop and localised reinforcement. Supplied with an elegant storage box, certificate of authenticity and a individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 7.204“ inch / 183 mm 
Total length: 12.598” inch / 320 mm
Handle length: 5.393" inch / 137 mm
Handle scales: Iron Wood

Blade Thickness: 6.1 mm
Overall weight 292 gr.

Böker Leopard I. Damascus Folding Knife (Limited Edition)

- Made in Solingen / Germany -

Introduction:

The impressive Boker Leopard-Damascus I. is a real piece of living history. The blade is made of high-performance Damascus, forged exclusively for Boker from the gun barrel steel of the German Leopard I battle tank. It has a hardness of 61 to 63 HRC and a high degree of toughness at the same time. The 300-layer Damascus in the Small Pyramids pattern is ideally suited to the hardcoat-anodised handle made of CNC-milled AlMgSi1, which is considerably higher quality than the usual AlMg3 due to the higher silicon proportion. The decorative inlays are made of certified imported Ziricote Wood. With convertible clip (tip-up/tip-down). Delivery with gift box, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus
Blade length: 3.543“ inch / 90 mm
Total length: 8.267” inch / 210 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Aluminum / Ziricote Wood
Overall weight 120 gr.

Note: We from Dream-Knives have no influence on which serial number we receive from Böker.

German Böker MG-42 Damascus Collector's Dagger

- Made in Solingen / Germany -

Introduction:

With the classically elegant Boker MG-42 Damascus Dagger, the crown of historical Boker Damascus steel projects is provided with yet another jewel. The MG-42 is one of the internationally renowned milestones in weapons technology, thanks above all to its revolutionary production technology at the time with the consistent use of stamped sheet metal parts, exceptional reliability and ease of use, and a cadence that was previously unknown.

Raw materials and production time had increasingly become critical and decisive factors in the course of the war. Therefore, the Army Ordnance Office was looking for a successor to the MG-34, which was already convincing in its function, but took up too much time and material due to its complex production. The new MG was also to serve as a standardised weapon for light, anti-aircraft, airborne and aperture purposes. Since the central task was not to improve the product but to optimise the manufacturing process, a proven specialist in mass production rather than a weapons expert was commissioned with the new design. The choice fell on Werner Gruner, a mechanical engineer at the Johannes Großfuß metal and lacquerware factory. Gruner was presumably assisted in the development by experienced gun designers. The consistent use of sheet metal stampings instead of milled parts and the omission of accurateness in non-functional details made it possible to build a weapon that was even more reliable than its predecessor, while significantly reducing production time and costs. Almost trouble-free function and firing accuracy in all weather conditions, the change of hot-shot barrels within seconds and a cadence of 1,500 rounds per minute (25 rounds/second) established the MG-42's reputation. A brake in the form of additional mass in the breech cavity made it possible to reduce the immense cadence to 700 rounds/minute and thus the ammunition consumption. A roller shutter controlled by a cam made these impressive technical characteristics possible. In a slightly modified form, the MG-42 is still the standard MG of the German armed forces today as MG 3. Rare originals from the Second World War fetch between USD 40,000 and USD 60,000 at Rock Island Auctions.

The steel of the MG-42 is forged by our long-time and experienced partner Chad Nicols into the heart of the dagger, the double-edged blade with a discreet hollow groove on both sides. The chosen Damascus pattern, Low Layer Raindrop (40 layers) is excellently accentuated by the symmetrical profile of the blade.

The dagger's toggle and pommel are made of solid stainless steel. In the pommel, the cooling fins and gas outlets of the recoil amplifier (actually a combined component with the functions of a recoil amplifier, a flash hider and a barrel guide sleeve) were incorporated as a design element. Nevertheless, form followed function here as well, for the grooves increase the grip of the dagger in the reverse grip. The toggle and pommel joinlessly hold the barrel-shaped roll of hornbeam wood, which is automatically centred in the hand by its shape. The dagger is equipped with a high-quality sheath made of dark brown leather with a belt loop and place reinforcement. Supplied with a classy frame case for seemingly floating presentation, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 5.314“ inch / 135 mm 
Total length: 10” inch / 254 mm
Handle length: 4.685" inch / 119 mm
Handle scales: Iron Wood

Blade Thickness: 5 mm
Overall weight 195 gr.

German Böker P08 Luger Damascus Collector's Boot-Dagger

- Made in Solingen / Germany -

Introduction:

The unique Boker P08-Damascus boot dagger connects the world of knives with historical military history in an inimitable way. The P08, also known as Parabellum Pistol or simply Luger, is still considered legendary today and convinces with highest precision and reliability. The knee-joint lock with short barrel return, developed by Georg Luger, made the pistol 08 incredibly compact and solid. Added to this was the calibre 9 mm Luger (9x19 NATO), also developed by Luger for the new pistol, which was one of the most powerful short firearm calibres at the time and is still the most widely used official calibre in the world today.

It was used as a standard pistol by the German armies in both world wars, but also gained world fame beyond the country's borders in a very short time. As early as 1914, the weapon was used in the armies of Bulgaria, the Netherlands, Portugal and Turkey and was considered a much sought-after prey weapon until the end of the Second World War. The production of the compact pistol required 14 kilogrammes of Steel and its design required such a high degree of precision that completely new demands were made on the production technology. Its unmistakable, almost iconic appearance secured it a firm place in popular culture like no other pistol.

The Boker P08-Damascus not only incorporates various design elements of the unusually aesthetic official weapon, but is also equipped with a unique damascus blade made of the barrel steel of the precise pistol. The remarkable damascus is forged for us by Chad Nichols by hand in the Boomerang pattern. The handle scales of the likewise compactly built boot dagger are made of certified imported rosewood and are reminiscent of the classic, simple checkering of the characteristic pistol grip. The same construction of the retaining screws is used to mount these handle scales as on the P08. And the cone of the exposed barrel is also found in the angle of the handle sides.

The bolsters and end knob are made of steel and are finished with a dark stonewash finish. Supplied with a high quality black leather sheath with a sewn-in ulticlip and can be easily attached thanks to the locking spring clip. Thus the Boker P08-Damascus boot dagger can be pulled effortlessly while the sheath is reliably held in place by the Ulticlip. Handmade in the Boker Knife Manufactory in Solingen. With noble floating display, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 3.228“ inch / 82 mm 
Total length: 6.889” inch / 175 mm
Handle length: 3.661" inch / 93 mm
Handle scales: Rose Wood

Blade Thickness: 3.5 mm
Overall weight 106 gr.

German Böker "Siwss Army Mosaic Damascus Dagger"

- Made in Solingen / Germany -

Introduction:

As early as the 15th and 16th centuries, the Swiss dagger was used as a common weapon by Swiss pikemen and, due to its blade length, often occupied a middle position between dagger and sword. The dagger, also known as a baselard, usually served as a secondary weapon and was usually not issued as equipment, but had to be procured privately by the soldiers.

The extraordinary Twisted Damascus is now followed by the Mosaic Damascus, which is also very complex to manufacture. It is one of the royal class of Damascus forging and makes the impressive dagger an absolute highlight in every knife collection. In contrast to conventional Damascus, no layers are produced in the manufacture of Mosaic Damascus. Instead, complex Damascus bars are forged by hand into a mosaic in an elaborate and very complicated process. To do this, the Damascus package, which initially consists of stacked layers, is cut up and reassembled in a staggered manner to create a unique mosaic pattern at the end faces of the bar. The DAMASCUS is then cut up again and the complex process is repeated several times, the resulting pattern becoming finer and more unique with each step. Finally, the individual packages are stacked and forged in the shape of a square so that the ends of the individual pieces form a new surface. Forging temperature, forming, deformation rate and the previous steps must be optimally coordinated. This extremely demanding forging process, which only few DAMASCUS smiths master, is carried out to perfection for our Swiss dagger by Chad Nichols.

The dagger blade, sharpened and pointed on both sides, already had a diamond-shaped cross-section in historical models, because this construction proved to be extremely stable and effective. Characteristic of the Swiss Dagger is the design of the pommel and the crossguard. The unusual, curved design can be traced back to the early 13th century and can also be found in the authentic design of our hand-made edition. The shimmering dark handle made of hand-picked certified imported EBONY is bordered by the highly polished pommel and the crossguard and forms a perfect unit with the fine blade.

The leather sheath, specially designed and handsewn for this model, underlines the exclusivity of this coveted collector‘s item. It is delivered with an individual serial number in a noble wooden box and with a certificate of authenticity. Handmade in the Boker Knife Manufactory Solingen and strictly limited to 500 pieces worldwide.

Specifications:

Steel: Damascus (see description)
Blade length: 8.622“ inch / 219 mm
Total length: 14.173” inch / 360 mm
Handle length: 5.551" inch / 141 mm
Handle scales: Ebony Wood

Blade Thickness: 5 mm
Overall weight 256 gr.

German Böker Tirpitz Damascus Pocket Knife

Collectors knife *Serial numbered*

Made in Solingen / Germany 

Introduction:

A piece of history comes to life! The Tirpitz, sister ship of the legendary Bismarck, was the largest battleship ever launched for the German Navy. After the commissioning in February 1941, the Tirpitz soon became a permanent threat for the Western Allies? Navy in the Northern Atlantic. History tells of many attempts to destroy this mighty weapon-loaded colossus. After the Tirpitz was heavily damaged by air attacks from the British Royal Air Force in September 1944, the ship was placed stationary at the Norwegian coast at Tromsö. Once again, the Tirpitz was the primary target for heavy attacks of the Royal Air Force. Then, on November 12. 1944, the Tirpitz was hit by special "Tallboy bombs", which caused the ship to roll over in the shallow water.

Shortly after WW II, a Norwegian specialized company began to explore the wreck and to obtain the high alloy steelfor further civil use. Scientists were very interested in this material as it was used in research and development of measurement technology and even in the astronautics industry. Especially for Boker, Norwegian divers have now retrieved parts of the special armor of the Tirpitz from the Fjord. These pieces of living history are being exclusively forged by our Damascus forger to an extraordinary Damascus Steel with an exciting background. The pattern "Great Pyramids", with more than 300 layers, adorns the mighty 4" blade and makes this piece the highlight of any collection. The combination of the Tirpitz steel and carbon tool steels also creates an extremely rugged Damascus Steelwhich has a hardness of 61 to 63 HRC and can handle any cutting task with ease. The handle, made of high strength AlMgSi1 Aluminum (with Silicium, making it a much higher quality than standard AlMg3), is hardcoat anodized and provides a firm and secure grip. The reversible clip allows for tip-up or tip-down carry. For the handle inlay we chose domestic walnut, which has a long history as shaft wood for German rifles due to its superior characteristics. This eye-catching inlay also features the original Tirpitz crest. This knife combines history, tradition and modern technology in a more than unique way. Comes complete in a presentation box with a certificate of authenticity and is serial numbered.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 3.5 mm
Overall weight 167 gr.

Muela Agarre Luxury Collectors Hunting Knife 

Introduction:

The "AGARRE de Deluxe" is a limited and numbered edition of 250 pieces.

It is a finishing knife, it honors the cast of the same name in the hunt, when the dogs catch up and hold the prey. It is precisely the scene that, beautifully carved, is shown in relief on the guard, in sterling silver.

With a magnificent blade in stainless steel. MoVa with double edge, dagger type, and with a hilt in deer horn from the quarrying, topped with pommel with detail, also in silver, of holm oak leaves.

It comes with an opulent embossed leather sheath of the highest quality, which is at the height of such an extraordinary piece.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This knife will only be made to order and the delivery time will be longer than estimated. Please contact us for the estimated delivery time: 

info@dream-knives.com

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15) - 57-58 HRC
Blade length: 10.433” inch / 265 mm 
Total length: 16.732” inch /  425 mm
Handle length: 6.299” inch / 160 mm
Handle: Crown Staghorn

Blade thickness: 4 mm

Knife Weight: 670 gr.

Muela African Big Five "Buffalo" Hunting Knife

 - Handcrafted in Spain by Muela -

*Please note the delivery time for this collector knife is 4 weeks after your order, because this knife is hand crafted especially for you*

Introduction:

Here we offer one of the African BIG FIVE Series from Muela for sale. This is the model "Buffalo". The sculptures reveal unquestionable art and know how. They are smellted in STERLING SILVER and complement other none the less attractive details in fine GOLD. The blade of the knife dedicated to the buffalo is an impressive double edge piece, with a lanceolate profile. The observe has been laser beam engraved with the allegory to the "Great African Bull". On the reverse, there is the name of the collection, as well as the emblem of the Muela African Safari Series. The high quality leather sheath of the Buffalo knife is complemented with a piece of Crocodile leather. Each BIG FIVE collectors knife, comes in a beautiful wooden presentation box & certification.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 9.448” inch / 240 mm
Total length: 15.748” inch /  400 mm
Handle length: 6.299” inch / 160 mm
Handle scales: Staghorn

Fittings: Sterling Silver
Knife weight: 632 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Elephant" Hunting Knife

 - Handcrafted in Spain by Muela -

*Please note the delivery time for this collector knife is 4 weeks after your order, because this knife is hand crafted especially for you*

Introduction:

We are proudly present the African BIG FIVE Series from Muela for sale. This is the model "Elephant". The image speaks values of the quality of the sculptures of the different animals honoured in this collection. Manufacture Muela will only make 150 pieces for each model in this collection. The "Masai" traditional shield and the plaque on which the serial number, whereby both pieces are in GOLD. The awsome sheath of the elephant knife includes a piece of exotic , African leather, such as the ostrich. The knife dedicated to the largestland animal has an impressive curved counter blade. Each handle is made of red deer stag, carfully selected in terms of shape, dimensions and quality. Each BIG FIVE collectors knife, comes in a beautiful wooden presentation box & certification.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 8.858” inch / 225 mm
Total length: 15.551” inch /  395 mm
Handle length: 6.692” inch / 170 mm
Handle scales: Staghorn

Fittings: Sterling Silver
Knife weight: 668 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Leopard" Hunting Knife

 - Handcrafted in Spain by Muela -

*Please note the delivery time for this collector knife is 4 weeks after your order, because this knife is hand crafted especially for you*

Introduction:

We are proudly present the African BIG FIVE Series from Muela for sale. This is the model "Leopard". The image of a Muela knife emerges from the red deer stag handle and the double edge blade. Object "Of Hunting & Art" in which the figure of the Leopard can also be highlighted; The cat whose danger has earned itself a place among "BIG FIVE"! Details of the STERLING SILVER guard of the "Leopard", and the corresponding covers applied to the blade using laser engraving. This "Big Five" edition is included in the African Safari Series, which was launched in 2012, with the knife dedicated to "Kudu". Perhaps these knives, true collector's piece Hill remain in display cabinets, but if anybody wants to use them "for hunting", they are not goimg to be disappointed. The sheath of this model also included a crocodile piece, which highlights its attractiveness and exclusivity. It's rim has been conveniently in the shape of the guard. Each BIG FIVE collectors knife, comes in a beautiful wooden presentation box & certification.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 9.448” inch / 240 mm
Total length: 15.748” inch /  400 mm
Handle length: 6.299” inch / 160 mm
Handle scales: Staghorn

Fittings: Sterling Silver
Knife weight: 557 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Rhino" Hunting Knife

 - Handcrafted in Spain by Muela -

*Please note the delivery time for this collector knife is 4 weeks after your order, because this knife is hand crafted especially for you*

Introduction:

We are proudly present the African BIG FIVE Series from Muela for sale. This is the model "Rhino". The blade of the model devoted to the Rhino is a "Bowie" type and is certainly extremely impressive. The .458 Win Mag caliber cartridges located alongside it are used to give an idea of its large dimensions. The map of Africa decorated with Zebrastripes (emblem of the Muela African Series), has been placed on the observe of each of these limited edition knives. The Rhino knife sheath includes two pieces of crocodile leather to make it even more eye-catching and attractive. All of the crowns are also adorned with a piece of STERLING SILVER which represents an allegory to the African Continent. The "Rhino" that has been recreated in the silver guard is the "Black" one, perhaps half the size and weight of the "White", but is undoubtedly more than double its aggressiveness and danger. For many years, only the "small" one was considered to form part of the "BIG FIVE". Each BIG FIVE collectors knife, comes in a beautiful wooden presentation box & certification.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 9.448” inch / 240 mm
Total length: 16.141” inch /  410 mm
Handle length: 6.692” inch / 170 mm
Handle scales: Staghorn

Fittings: Sterling Silver
Knife weight: 666 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela  Covarsí-C.TH Anniversary 30 Years Limited Collectors Knife

- Handcrafted by Muela in Spain –

Introduction:

"30 Anniversary" Numbered and limited Edition of 250 units (only !).

It has been 30 years since Manufacturas Muela incorporated the model COVARSÍ into its knife catalog.  Our knife CORVASÍ, was designed in honor of D. Antonio Corvasí (1848 - 1937), montero and gentleman who became famous for his hunting experiences and who knew how to capture in several books that have come to our days for school and enjoyment of several generations of hunters who, like him, loved hunting and Nature. A little more than a quarter of a century later, we wanted to celebrate this anniversary with a double tribute: to the person of D. Antonio and to our knife, whose figures were left 30 years ago, somehow united. With hooks of stabilized poplar root wood and a sheath made in the artisan workshop "Quercur Leathercraft" we are sure that our humble tribute to the great gentleman and montero who was D. Antonio Covarsí, this limited edition of 250 units, will be to the liking and enjoyment of many fans of hunting and our knives. In gallery of images, D. Antonio Covarsí, in photography coming from the edition of 'Narrations of a Montero' published by Ediciones Velázquez in Madrid in 1978. An extraordinary piece by design, manufacture and strength, whose quality is even more evident from the exclusivity of its limited and numbered edition of 250 units and its luxury details, full of know-how and authentic craftsmanship.

Muela's philosophy about their luxury knives:

Without a doubt, among "Manufactures Muela's production, Luxury knives occupy a very special position. Knives for which exclusive designs combine precious metals and woods with exceptional craftmanship. Embossed silver, etchings and enamels, added to various luxury elements, make of this series a superb example of authentic tradition and artisanship of our knives, even including hand-forged Damascus steel blades meeting the undeniable quality standards of the "Knives as jewels" concept and manufactured for these Muela products for many years. Naturally, each individual knife comes in its own specific high quality sheath, in a special presentation box, and accompanied with a certificate accrediting its limited production. So, this super beautiful and strictly limited Muela hunting knife comes with nice storage box with Muela certification.

Steel quality informations about that superb luxury collectors knife:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 9.645” inch / 245 mm
Total length: 15.354” inch /  390 mm
Handle length: 5.708” inch / 145 mm
Handle scales: Stabilized Poplar Burl
Knife weight: 533 gr.

(We from Dream-Knives have no influence on which serial number we receive from Muela)

Muela LUPUS-25DAM.C Damascus Luxury Collectors Knife

- Handcrafted by Muela in Spain –

"Damascus steel” of 576 layers.

Introduction:

Here we offer you a real jewel from the knife manufacture Muela for sale.
This is the model "Lupus", which was manufactured exclusively from the finest materials. The breathtaking beauty of this collector's knife can hardly be surpassed, because the harmonious and double-edged blade shape speaks for itself. The handle is made of finest and specially selected staghorn in combination with finest rose wood. The guard element and the grip pommel (wild boar) are made of brass and complete the overall impression of this luxury knife.

Muela's philosophy about their luxury knives:

Without a doubt, among "Manufactures Muela's production, Luxury knives occupy a very special position. Knives for which exclusive designs combine precious metals and woods with exceptional craftmanship. Embossed silver, etchings and enamels, added to various luxury elements, make of this series a superb example of authentic tradition and artisanship of our knives, even including hand-forged Damascus steel blades meeting the undeniable quality standards of the "Knives as jewels" concept and manufactured for these Muela products for many years. Naturally, each individual knife comes in its own specific high quality sheath, in a special presentation box, and accompanied with a certificate accrediting its limited production.

So, this super beautiful Muela hunting knife comes with nice storage box with Muela certification.

Please note:

This Muela luxury collector's knife is made especially for you by Muela after your order. Therefore there is a short waiting time of 15 business days until we are able to ship your order.

Steel quality informations about that superb luxury collectors knife:

Carbon Damascus Steel Blade

“Damascus steel” of 576 layers forged by hand following ancient techniques.

Specifications:

Steel: Carbon Damascus Steel Blade
Blade length: 9.842” inch / 250 mm
Total length: 15.354” inch /  390 mm
Handle length: 5.511” inch / 140 mm
Handle scales: Stag & Rose Wood
Knife weight: 530 gr.

Muela Magnum-23DAM.C Damascus Collectors Knife

- Handcrafted by Muela in Spain –

"Damascus steel” of 576 layers.

Introduction:

Here we offer you a real jewel from the knife manufacture Muela for sale.
This is the model "Magnum", which was manufactured exclusively from the finest materials. The breathtaking beauty of this collector's knife can hardly be surpassed, because the harmonious and beautiful bowie blade speaks for itself. The handle is made of finest and specially selected staghorn in combination with finest rose wood. The guard element and the grip pommel (wild boar) are made of brass and complete the overall impression of this luxury knife.

Muela's philosophy about their luxury knives:

Without a doubt, among "Manufactures Muela's production, Luxury knives occupy a very special position. Knives for which exclusive designs combine precious metals and woods with exceptional craftmanship. Embossed silver, etchings and enamels, added to various luxury elements, make of this series a superb example of authentic tradition and artisanship of our knives, even including hand-forged Damascus steel blades meeting the undeniable quality standards of the "Knives as jewels" concept and manufactured for these Muela products for many years. Naturally, each individual knife comes in its own specific high quality sheath, in a special presentation box, and accompanied with a certificate accrediting its limited production.

So, this super beautiful Muela hunting knife comes with nice storage box with Muela certification.

Steel quality informations about that superb luxury collectors knife:

Carbon Damascus Steel Blade

“Damascus steel” of 576 layers forged by hand following ancient techniques.

Specifications:

Steel: Carbon Damascus Steel Blade
Blade length: 9.055” inch / 230 mm
Total length: 14.566” inch /  390 mm
Handle length: 5.511” inch / 140 mm
Handle scales: Stag & Rose Wood
Knife weight: 445 gr.

Muela MASTIN.E Luxury Hunting Dagger

- Handcrafted by Muela in Spain -

Introduction:

The Muela Mastin (Mastiff) dagger is a true work of art. This wonderful and handcrafted dagger from Muela in Spain impresses with its excellent workmanship and the best materials. This luxury dagger is finished off with a hand guard and a coin integrated into the genuine stag horn crown made of sterling silver. This very fine dagger comes with a high-quality, handcrafted leather sheath and a beautiful storage box.

Note: Please keep in mind that stag horn is a natural product and that is why it always looks different.

*The delivery time is approx. 20 business days after ordering, cause each dagger is manufactured individually*

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) HRC 57-58
Blade length: 9.645” inch / 245 mm 
Total length: 16.141” inch /  410 mm
Handle length: 6.496” inch / 165 mm
Handle: Crown Stag Horn

Knife weight: 525 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.